Do Hanging Pipes Need to be Supported? (You Better Believe It!) Toilet Bazar

I was replacing my outdoor faucet last week and came across an issue I didn’t realize I had — hanging pipes in my crawl space.

Unfortunately, long pipe runs are affected by the weight of water and gravity. Without proper support, these sagging pipes can break at the joints, burst open, or split. And that could cost you a lot of patience and money.

Here’s what you need to know to support a hanging pipe in your home.

How to Support Hanging Pipes: Tips for Your Home

The bottom line is this: long runs of pipe need to be supported to take the weight off threaded, soldered, or cemented connections.

The good news is that you can do this easily with pipe hangers, wood scraps, or even wire hangers. In addition, there are a ton of different hanger types for every kind of situation. You can find them easily online or at your hardware store. If you have an unusual situation, try a plumbing supply house.

Plastic & Copper Pipes

Although plastic and copper won’t kink, they sag when filled with water. The weight can break the joints (or connections) and cause a serious leak. Consequently, this can cause expensive water damage and a whole lot of frustration.

Space and install hangers every three feet for plastic and copper pipes.

PRO TIP: If you’re hanging a metal pipe, make sure the hangers are the same metal material as the pipe. Plastic can use metal or plastic hangers and supports.

hanging pipes - pair of white 3 inch plastic pipe hangers
These hangers are screwed to the ceiling, allowing the pipe to be placed inside the hanger. A super easy installation.

Galvanized Steel Pipes

Plastic and copper pipes generally need more support than galvanized steel. So, you can make a solid support system for galvanized steel by spacing your hangers every 4 feet.

See also  9 Best Tankless Toilets with High-Pressure Flushing - Reviews

Of course, you can stick to the above every-3-feet rule if you prefer.

hanging pipes - simple galvanized steel pipe hanger to support steel pipe sagging
A simple galvanized steel bracket to use as a pipe hanger on a galvanized steel pipe. Always remember that best practice calls for metal pipes to be supported by a hanger made from the same metal material.

Pipes on 90-degree Turns

Where a pipe makes a 90-degree turn, you won’t be able to hang it, regardless of the type of pipe material.

Instead, support the bend in the pipe with by placing a wood brace underneath it. Another option is to use a strap-style hanger.

Hanging pipes - Wooden block placed under 90 degree bend in pipe
A wood brace was used in this situation to support a 90-degree bend in the pipe.

Pipes on Masonry

If the pipe snakes along a masonry wall, you can often install hangers with concrete nails.

To do this, drive the nails flush with the hangers, then stop hammering. Too much hammering will loosen the nails.

hanging pipes - bracket used to hang pipe on brick masonry
Example of a bracket used to attach a pipe to brick or masonry.

Check Your Local Codes

Make sure you check with your local government before you apply any of the above.

More so, it’s possible that your area might have plumbing codes which require different kinds of materials, supports, and spacing to properly hang your unsupported water supply pipes.

Final Thoughts: Hanging Pipes

Overall, it’s easy to understand why a long run of pipe needs support. I mean, just hold your hands out for a few minutes. They’ll begin sagging real quick, right?

Undoubtedly, supporting a long run of pipe with pipe hangers is incredibly easy. If you can mount a picture frame on a wall, you can hang or support a pipe.

Just remember the tips above, head to your hardware store or supply house for materials and get out your drill and screwdrivers. That’s all you’ll need.

#Hanging #Pipes #Supported

Leave a Comment